How Can A Submarine Cable Network Improve Your Operations?

When you are working offshore, you need to know that you can actually reach the people that are working on these offshore rigs. You could have stations set up hundreds of miles from the shore, and you need to know for sure that you have been given the very best possible options to communicate with them. You can work out all these options with the fiber optic engineer who will do more of the work for you, and they can explain how these communications networks work for you. In fact, a submarine cable network can help you reach any location without endangering the system. 

How Does The Cable Network Function?

A submarine cable network that you order starts with the actual cables. The engineering team is going to make it that much easier for you to string along the cables for hundreds of miles. These cables tend to be very long, and they are also very heavy. They include all the communication capacity that you need from Internet to phone and data transfer. This is vitally important because you need to know that you get everything in one package. When you do not get everything in one package, it is hard to have more than one cable installed.

The cable network can be tested before you even have it installed, and you can even use deep water monitoring systems for your company if you need them. This means that you can link up all the sensors to the devices that you have on the rig. You can measure anything that needs to be measured, and you will feel much better knowing that you can use these systems all together. When you cannot use all these systems together, it will be impossible for you to get them all installed in an affordable manner.

How Do They Handle Installation?

When you order a submarine cable network, the team will use a boat to reach your position. They will use small submarines known as ROVs or remote operated vehicles. They will use cameras to see where they are going to place the cables on the seafloor, and they can continue this project until you have reached the rig. This is the point at which the company is going to connect the cables to the rig. You can test the system, and you will see how much power you have.

You also need to ask the company if they can connect you to the shore-based offices that you have set up. You can use the same team to service or repair your cables. This makes it much easier for you to get the results that you want, and you will feel much more confident knowing that you have access to the company. They can let you know if they think something is wrong, and they can walk you through troubleshooting. They can come out for repairs, and they can even replace the whole system if it does not work properly anymore. This might be especially important if you have taken over an old rig with a system that was installed in the days before modern technology.

Contact The Installer Today

You need to work with an Subsea Installation Engineering team to set up the deep water monitoring systems, the cable network, and anything else that you need for your offshore rig. Most people who are looking for these systems are working very far from the shore, and you can solve these problems by getting one fiber optic network that does everything for you. You can order installation, service, and repair at any time to keep your offshore team safe and comfortable.